How To Paint Over Chipped Paint | Peeling Paint Fixation

Many properties, gadgets, and appliances must be maintained as time passes. If we don’t do things like washing, learning how to paint over peeling paint and spray painting our vehicles, and reinforcing the walls of our buildings, when necessary, our properties will lose their value. Even our human body needs to be appropriately taken care of.

Our properties experience minimum damage when physical, chemical, biological, or even environmental changes are affected. Nevertheless, we must still do well to care for what belongs to us.

Peeling paint must be stripped away to guarantee adequate adhesion before adding a new coat.

Can I Paint Over Peeling Paint?

Yes, it is possible, but some essential things need to be noted before going into it. First of all, many surfaces need to be painted. And various kinds of paint can be used to paint a surface.

The surfaces can be wood, wall, glass, clay, metal, concrete, plastic, etc. Then the kinds of paint are oil paints, acrylic emulsion paints, latex paint, epoxy paint, masonry paint, ceramic paint, bake-on paint, spray paint, traditional paint, etc.

There are so many surfaces that need paint and more types of paint. With all these numerous differences, there will be different ways of painting over their already painted surfaces that are peeled.

Equipment List

Many pieces of equipment can be used to paint different surfaces, but the first on our list must be protective gear.

Protective Gear: Helmet, face protection, welding goggles, welding gloves, welding clothing, face protection, and even earplugs or earphones.

These are needed no matter the surface being painted on. Now, let’s see the equipment for the different kinds of surfaces.

1. Wood

1. Wood filler
2. Sanding sponge
3. Tack cloth
4. Painter’s tape
5. Quality paintbrush
6. Paint sprayer

2. Wall

1. Ladder
2. Spackle and Spatula
3. Drop cloth(s)
4. Brushes and Rollers
5. Paint Scraper
6. Putting knife or Taping Knife
7. Sandpaper
8. Plastic Covers or newspapers
9. Roller trays and Paintbrush combs
10. Screwdriver, claw hammer, or pliers

3. Metal

1. Wire brush
2. Shop rags
3. Scuffing pads

4. Concrete

1. Concrete filler
2. Metal bristled brush
3. Pole sander
4. Power sander
5. Paint roller
6. Fine-grit sandpaper discs
7. Putty knife

5. Glass

1. Applicator Sponge
2. Paintbrush
3. Cotton cleaning cloths

6. Clay

1. Small or medium foam brushes
2. Plastic plates
3. Cotton Swabs
4. Paintbrush
5. Wire brush

7. Plastic

1. Paintbrush or paint roller
2. Sponge or absorbent cloth
3. Paint tray
4. Sandpaper
5. Varnish
6. Plastic Cleaner

Should I Remove Peeling Paint Before Repainting

Yes, you need to remove the peeling paint before repainting the surface. If you don’t remove it, the newer coats of paint will start peeling in a very short while. Removing the peeling old paint might be very stressful and time-consuming, but it would be worth it in the long run.

How To Paint Over Peeling Paint?

With the various kinds of paintable surfaces and the various types of paints, there will be different ways or methods to paint over peeled paint concerning different kinds of surfaces. Let’s see how to paint over peeling paint on different surfaces.

Wood

1. With a paint scraper, scrape the free edges of the painted area. Be careful not to harm the wood with the razor-sharp edges of the scraper.
2. Put some wood filler with a pocket knife and a thin layer of filler over the scraped area. Ensure that the wood filler extends a bit over the perimeter of the scraped area. This surplus wood filler must later be trimmed off.
3. Let the wood filler dry according to the directives from the manufacturer. It usually takes about three-quarters of an hour, but to be on the safe side, you can leave it for two hours. If you clear it before it has dried, the filler will shed off when you sand it.
4. Attach a fine-grit paper to the scraped area.
5. Ensure the repaired area is very smooth; you can confirm with the tip of your fingers. The repaired area should be in sync with the adjacent paint. If you discover that smoothening the whole board will be too tasking for you, especially when the board is seriously damaged, you can change the board at once. Repeat the earlier steps if the wood filler is not in sync with the surrounding wood.
6. When the previous steps have been done to your satisfaction, apply a primer to the whole plane before you start painting.

Wall

1. With a paint scraper, brush aside as much of the peeling paint so you can get rid of any more obstinate patches.
2. Use a high-performance sealant primer on the affected areas
3. When the primer has fully dried, use a filler to coat the area lightly
4. Using electric or handheld sandpaper, sand the filler area down until the wall feels smooth and even to the touch
5. Apply a second layer of primer over the freshly filled patch/patches
6. Go in with the paint that matches the rest of the wall and applies two coats for a great finish.

Metal

1. Remove all unsteady, peeling paint down to the bare metal.
2. Ensure there are no contaminants on the exposed metal, such as dirt, oil, etc. you can use an etching liquid to clean them.
3. Wash out the surface with pure water.
4. Put on a metal primer that has been galvanized. You can now paint.

Concrete

1. With a scraper and a wire brush to remove all the flaking paint, then, with 100-grit sandpaper, you smoothen and sand the rough edges. Don’t forget to clean your workspace using a broom to sweep the paint and dirt off the floor.
2. Fill all gaps and breaks with mortar. Smoothen the mortar and allow it to dry for the time suggested by the producer. Clean the floor of all oil or oil stains using a Clean the floor utilizing dish cleanser and water. Allow the floor to dry totally.
3. Thin the paint for the primary coat according to the manufacturer’s information. Pour the recommended sum of diminishing operators into the paint. Utilize water for latex paint or paint slenderer for oil-based epoxy paint. Blend the paint well.
4. Apply paint to the external edge of the floor using a 3-inch paintbrush. Turn the paintbrush sideways to guarantee that the edge line of paint is wide sufficient to anticipate the roller from touching the divider as you paint. Utilize the paintbrush to cut the paint around all objects or zones where the roller will not fit.
5. Insert the roller cover onto the expansion paint roller. Pour the paint into the paint skillet. Run the loaded roller back and forward over the lattices within the paint skillet; roll the paint onto the floor. Work in little segments with one load of the roller. Reload the roller cover and rehash until the whole floor has been secured with a coat of paint. Let the floor dry for 24 hours.
6. Pour paint that has not been diminished into the paint skillet. Embed a modern roller cover onto the expansion paint roller. Rehash Step 4 to apply a moment coat of paint to the floor. Let the paint dry for the time suggested by the manufacturer.

Glass

1. To begin with, wash the glass all together in warm, sudsy water to wipe off the dirt, clean, and oil.
2. Dip the glass in warm water and let it dry completely.
3. Hose a paper towel with rubbing liquor or white vinegar and wipe the stemware to guarantee it is clean of any remaining cleanser film. Set aside for 15 minutes to air-dry.
4. The glass surface is presently prepared for paint.

Clay

1. Be sure to clean the material
2. Thoroughly remove soil and salt buildup; clean the surface with a wire brush if required.
3. Once clean of soil and flotsam and jetsam, splash the clay pot in an arrangement of 9 parts water to 1-part fade for 24 hours to kill any remaining bacteria.
4. After dousing, flush the pot with clean water and allow it to dry. Now you can paint over it.

Plastic

1. Thoroughly scrape the peeling paint with a paint scraper
2. Carefully sand down the edges of the peeling paint.
3. With a cloth plunged in an arrangement of hot water and dish cleanser or a good all-purpose cleaning operator, you clean the scraped zone and the surfaces close to the scraped perimeter.
4. You can now paint over the surface.

Conclusion

This write-up has extensively explained why and how to paint over peeling paint. It also covers the different surfaces and paints to give you a better idea of the subject matter.